You have no items in your shopping cart.
Categories
Picture of Q2261050 1 X 1/2 6OUT PLAST MANIFOLD
Picture of Q2261050 1 X 1/2 6OUT PLAST MANIFOLD
Picture of Q2261050 1 X 1/2 6OUT PLAST MANIFOLD

Q2261050 1 X 1/2 6OUT PLAST MANIFOLD

Uponor Q2261050 1 in. EP Branch Multi-Port Tee, 6 Outlets
Manufacturer: Uponor
$0.00
Engineered polymer (EP) branch multi-port tees are used in hot and cold domestic potable water distribution systems. The multi-port tees are available with 3/4 in. or 1 in. ProPEX inlets and 1/2 in. ProPEX outlets. Note: Temperature and pressure ratings stated are hydrostatic ratings. For domestic hot-water (DHW) and DHW recirculation installations, operating conditions should not exceed 140 deg F (60 deg C) at 80 psi (5.5 bar) in accordance with ASTM F2023. For additional information regarding application-specific temperature and pressure ratings, refer to the Uponor PEX Piping Systems Design and Installation Manual.
Products specifications
products.specs.attributename products.specs.attributevalue
End Connection ProPEX
End Connection 1 ProPEX
End Connection 2 ProPEX
End Connection 3 ProPEX
Fitting Size 1 1 in.
Fitting Size 2 1 in.
Fitting Size 3 1/2 in.
Fitting Sizes 1 in. x 1 in. x 1/2 in.
Flow Rate 16.5 gpm;8 fps;6.6 gpm;4 fps
Height 2 in.
Length 9-1/3 in.
Material Engineered Plastic
Maximum Temperature 210
Pressure - Maximum 150 psi
Size 1 in. x 1/2 in. x 1/2 in.
Specifications - NSF Certified Yes
Product Type Hydronic Branch Manifolds
Lead Law Compliant Yes
Specifications - ASTM ASTM F-877;ASTM F-1960
Specifications - CSA Certified CSA B137.5
Specifications - IAPMO Listed Yes
Specifications - NSF NSF 14;NSF 61
Temperature Range Up to 210 Deg F
Material Type Engineered Polymer
Package Quantity 10
Outlet Quantity 6
Information
Customer service
Copyright © 2025 Wolseley Express. All rights reserved.
Powered by nopCommerce